.png)
.png)
Posted
12-01-2019, 01:22 PM
https://twitter.com/ganja_seeds/status/1...8623385600
ARIZER ARGO VAPORIZER
Engineered with convection heating and built with a ceramic, glass and stainless steel air path, the ArGo delivers optimal vapor; this specific heating protects the integrity and flavor of your dry herb, delivering dense, flavorful vapor. The borosilicate glass mouthpieces keep the vapor cool and pure. An adjustable and retractable pop top provides easy access, and safe keeping, for the ArGo’s borosilicate glass aroma tubes—simply slide it out when ready for use!
The Argo is equipped with an OLED display and provides total user control; the device comes with precision temperature control, brightness control, customizable notifications, adjustable timers, and you can toggle between your choice of Celcius or Farenheit display.
Designed with a wide temperature range of 112° F - 428° F, the ArGo provides the user with custom vaporization and flavor profile exploration. Powered by an easily swappable 18650 battery, the device has pass-through charging, making it ultraportable and ready for use whenever you are.
HOW IT WORKS
Put some coarsely ground dry herb in a small container then gently push and slightly twist the glass aroma tube into the container to fill the dish. Do not press too hard or load tightly. Preheat the ArGo before inserting any tight tubes. To turn the ArGo on, press and hold the M and + button. The screen will illuminate and start counting down, continue holding the M and + buttons until the unit beeps and greets you with a smiley face. You will see the power delay time start to countdown. A beep is heard and a greeting is displayed when the ArGo is powered on. To set the temperature, press the + button and the device will start heating to the previously used temperature. Press the + or - buttons to adjust the temperature in 1° increments. Inhale vapor through the glass aroma tube with a slow steady draw. Try using different inhaling techniques with different temperatures to suit your personal needs and preferences.
MAINTENANCE
After numerous uses your Arizer ArGo should be cleaned to ensure optimal performance. If any materials fall into the heater bowl, simply turn the device upside down to empty the debris. Use the stainless steel cleaning tool to remove any materials from the borosilicate glass aroma tube. Soak glass components in isopropyl alcohol for a couple of hours then rinse with hot water. In most cases doing this will clean the glass tubes as good as new, but if not, simply repeat as necessary. Always ensure the glass aroma tubes are fully dry before your next use.
ARIZER ARGO VAPORIZER
Engineered with convection heating and built with a ceramic, glass and stainless steel air path, the ArGo delivers optimal vapor; this specific heating protects the integrity and flavor of your dry herb, delivering dense, flavorful vapor. The borosilicate glass mouthpieces keep the vapor cool and pure. An adjustable and retractable pop top provides easy access, and safe keeping, for the ArGo’s borosilicate glass aroma tubes—simply slide it out when ready for use!
The Argo is equipped with an OLED display and provides total user control; the device comes with precision temperature control, brightness control, customizable notifications, adjustable timers, and you can toggle between your choice of Celcius or Farenheit display.
Designed with a wide temperature range of 112° F - 428° F, the ArGo provides the user with custom vaporization and flavor profile exploration. Powered by an easily swappable 18650 battery, the device has pass-through charging, making it ultraportable and ready for use whenever you are.
HOW IT WORKS
Put some coarsely ground dry herb in a small container then gently push and slightly twist the glass aroma tube into the container to fill the dish. Do not press too hard or load tightly. Preheat the ArGo before inserting any tight tubes. To turn the ArGo on, press and hold the M and + button. The screen will illuminate and start counting down, continue holding the M and + buttons until the unit beeps and greets you with a smiley face. You will see the power delay time start to countdown. A beep is heard and a greeting is displayed when the ArGo is powered on. To set the temperature, press the + button and the device will start heating to the previously used temperature. Press the + or - buttons to adjust the temperature in 1° increments. Inhale vapor through the glass aroma tube with a slow steady draw. Try using different inhaling techniques with different temperatures to suit your personal needs and preferences.
MAINTENANCE
After numerous uses your Arizer ArGo should be cleaned to ensure optimal performance. If any materials fall into the heater bowl, simply turn the device upside down to empty the debris. Use the stainless steel cleaning tool to remove any materials from the borosilicate glass aroma tube. Soak glass components in isopropyl alcohol for a couple of hours then rinse with hot water. In most cases doing this will clean the glass tubes as good as new, but if not, simply repeat as necessary. Always ensure the glass aroma tubes are fully dry before your next use.
